Hello, welcome to Linqing Feite Bearing Co., Ltd

Linqing Feite Bearing Co., Ltd

Wechat:15998704166
Email:highcopybearing@qq.com
Linqing Feite Bearing Co., Ltd
Company news
您的位置: 首页 > News > Company news
329/5000 Tapered roller bearings are fine mechanical components
发布时间:2022-09-27浏览次数:0

Tapered roller bearing is a delicate mechanical part. Please do not open the package before the device to prevent rust. For once grease smooth bearings and both sides with oil seal or dust cover, sealing ring bearings can be directly installed, without cleaning.




In the installation process of tapered roller bearing, it is necessary to control a criterion, that is, the force or moment of the device can only be transmitted through the corresponding ring.




When the inner ring of tapered roller bearing is tightly matched with the shaft, and the outer ring is loosely matched with the bearing seat hole, the bearing can be pressed on the shaft first by a press, and then the shaft and the bearing are loaded into the bearing seat hole together. When pressed on the end face of the inner ring of bearing, an assembly sleeve made of soft metal materials (copper or mild steel) is mounted. When the bearing outer ring is tightly matched with the bearing seat hole, and the inner ring is loosely matched with the shaft, the bearing can be pressed into the bearing seat hole first. Then the outer diameter of the assembly sleeve should be slightly smaller than the diameter of the seat hole. If the tapered roller bearing ring is tightly matched with the shaft and seat hole, the inner ring and outer ring of the device should be pressed into the shaft and seat hole at the same time, and the structure of the assembly sleeve should be able to tighten the end face of the inner and outer ring of the bearing at the same time.


你觉得这篇文章怎么样?

0 0
标签:全部
Netizen comments

Administrators

There is no comment on this content

山东省潍坊市网友